Hikmicro M15 Firmware Update Download

£0.00
sold out

The newest firmware update file for the Hikmicro M15 unit - below you will find the download link for the firmware update and the steps below on how to update your unit;

Firmware Download;

https://www.dropbox.com/scl/fi/8ngcnpku919rq84x4l01j/T110-T2R3HKrFB03-20251121.zip?rlkey=60btma0i7e1wq9vlsb0wqgpfz&st=d7k37f8p&dl=0

How to update;

  1. Pull out the battery compartment at the bottom of the unit

  2. Remove SD card from M15 trail camera and insert this into your PC

  3. Once the SD card has appeared on your PC, copy all files from the above attachment over onto the SD card - please note, do not copy the folder - copy the 5 files from inside the folder.

  4. Insert the SD card back into the M15 unit.

  5. Set the sliding button on the front of the unit to the middle 'SETUP' option.

  6. Plug the supplied USB cable into your PC but not into the M15 unit.

  7. Hold down the 'SYNC' button on the unit for 5 seconds, then with the button still pressed, insert the USB cable into the unit.

  8. Release the 'SYNC' button - after a few seconds the SD card indicator will start flashing - this means the unit is updating.

  9. This may take a few minutes - once the unit is updated, it will restart and then the rest of the lights will come on.

  10. Your device is now updated - remove the USB cable and re-insert the battery compartment.

Get notified by email when this product is in stock.

The newest firmware update file for the Hikmicro M15 unit - below you will find the download link for the firmware update and the steps below on how to update your unit;

Firmware Download;

https://www.dropbox.com/scl/fi/8ngcnpku919rq84x4l01j/T110-T2R3HKrFB03-20251121.zip?rlkey=60btma0i7e1wq9vlsb0wqgpfz&st=d7k37f8p&dl=0

How to update;

  1. Pull out the battery compartment at the bottom of the unit

  2. Remove SD card from M15 trail camera and insert this into your PC

  3. Once the SD card has appeared on your PC, copy all files from the above attachment over onto the SD card - please note, do not copy the folder - copy the 5 files from inside the folder.

  4. Insert the SD card back into the M15 unit.

  5. Set the sliding button on the front of the unit to the middle 'SETUP' option.

  6. Plug the supplied USB cable into your PC but not into the M15 unit.

  7. Hold down the 'SYNC' button on the unit for 5 seconds, then with the button still pressed, insert the USB cable into the unit.

  8. Release the 'SYNC' button - after a few seconds the SD card indicator will start flashing - this means the unit is updating.

  9. This may take a few minutes - once the unit is updated, it will restart and then the rest of the lights will come on.

  10. Your device is now updated - remove the USB cable and re-insert the battery compartment.